High temperature annealing continuous silicon carbide rods pusher furnace for electronic components
A pusher furnace is a continuous furnace concept that allows the processing of small and large product in trays and baskets. The hearth consists of a series of steel, alloy, or ceramic skid type supports. For support of heavy loads, alloy rollers can be incorporated into the hearth or onto the trays to reduce the pushing forces required. Furnaces can be provided in electric, direct-fired, and indirect gas-fired configurations to meet specific processing requirements.
It is an ideal material for sintering, drying and annealing of advanced ceramic materials, alumina zirconia structural parts, electronic components, ceramic filters
| Maximum operating temperature | 1700℃ |
| Chamber size | L18000*W300 (double hole)*H250 (mm) can be customized |
| Push plate size | 280*280*50 |
| Sintering atmosphere | Air |
| Heating element | High-quality silicon carbide rods are used in the heating zone, and high-quality silicon-molybdenum rods are used in the high-temperature zone |
| Equipment Dimensions | L22000*W1800*H2000(mm) |
| Rated power | 320KW |
| Heat preservation power | 160KW |
1. Multi-surface heating method is adopted, and the temperature difference of the furnace can reach within ±5°C
2.Imported light insulation materials are used for heat preservation, high efficiency and 20-30% energy saving than traditional kilns
3.The production uses a special transmission mode, the system is stable, reliable, and runs smoothly which can highly improving product performance
4. Suitable for mass production, from pre-firing to product ceramic firing, the process is stable and the consistency is good.
With proven engineering knowledge and more than 20 years' experience we can provide you the right furnace solution.
We will well pack the goods based on the kinds of furnace and customer's requirement.
