Customized High Temperature Continuous Gas Sintering Rotary Calciner Kiln Equipment For Powder Material
Rotary kiln is a cylindrical vessel, inclined slightly from the horizontal, which is rotated slowly about its longitudinal axis. The process feedstock is fed into the upper end of the cylinder. As the kiln rotates, material gradually moves down toward the lower end, and may undergo a certain amount of stirring and mixing. Hot gases pass along the kiln, sometimes in the same direction as the process material (co-current), but usually in the opposite direction (counter-current). The hot gases may be generated in an external furnace, or may be generated by a flame inside the kiln.
| Item | Specification |
| Chamber size | L12000*W2000*H1100 |
| Drum size | ~Ø1200×15000 mm |
| Rated operating temperature | 800℃ |
| Work temperature | ≦700℃ |
| Fuel | Nature gas |
| Firing method | Flame combustion |
| Firing atmosphere | Oxidation flame |
| Kiln surface temperature rise | ≤75℃ |
| Smoke exhaust method | Bottom smoke exhaust on both sides of the wall |
| Number of high speed burners | 10pcs |
| Temperature control check point | 4 points |
| Furnace temperature uniformity | ±10℃ |
| Thermocouple Model | K type 5pcs |
| Fan | 1pcs |
| Induced fan | 1pcs |
With proven engineering knowledge and more than 20 years' experience we can provide you the right furnace solution.
We will well pack the goods based on the kinds of furnace and customer's requirement.
